Large Capacity Programmable Climatic Test Chamber for Transformer Testing
Experience reliable and precise testing with our 50CM3 and 150CM3 Walk-In Test Chambers, designed for large-scale climatic testing of transformers and various electronic components. Our chambers are constructed with lightweight insulated panels, ensuring quick and hassle-free installation.
Key Features:
-
Customizable Design: These chambers are custom-built to accommodate various sizes and shapes, making them suitable for a wide range of applications. The use of high-quality silicon rubber for sealing and contracting ensures high tightness, perfect sealing, and exceptional temperature and humidity resistance.
-
Non-Frosting Operation: Enjoy continuous operation in low humidity and temperature conditions, thanks to the automatic defrosting loop.
-
Intuitive Control: A 7-inch large color control screen provides a comprehensive display of the chamber's operating status, allowing you to monitor and adjust settings with ease.
-
Energy-Efficient: Our chambers automatically set precooling and preheating temperatures based on reset time, optimizing energy consumption and potentially saving up to 50% compared to older models.
-
Uniform Exposure: The chambers are designed for low error, high wind speed, and uniform exposure of test samples, ensuring reliable and consistent results.
-
Quiet Operation: With a low-noise design, our chambers operate at a noise level of under 72dB, ensuring a quiet testing environment.
Whether you are testing rechargeable batteries, PCBA, LCD screens, scanners, monitors, LED components, or biological equipment, our Walk-In Test Chambers are ideal for maintaining steady temperatures and controlled humidity. They are perfect for applications that require temperature and humidity testing exceeding 85°C.
Specifications :
Volume | 10m3 , 15m3 , 20m3, 30m3, 50m3, 100m3 , as per customer requirements |
Temperature range | -65 °C ~+80 °C |
Humidity range | 20%~95%R.H. |
Accuracy/uniformity | ±0.1 °C , ±0.1%R.H. / ±1.5 °C ,±5.0%R.H. |
Accuracy/volatility | ±1.0 °C , ±2.0%R.H./±0.5 °C , ±3.0%R.H. |
Cooling time | 5.0 °C /minute |
Inside material | SUS#304 Stainless Steel |
Insulation material | High-temperature high-density amino acid ethyl ester foam insulation materials, |
Cooling system | Water-cooled / two-stage compressor |
Protection | No fuse switch, compressor overload switch, high and low pressure protective switch, over-humidity-temperature protective switches, fuses, warning system |
Accessories | recorder(option), view window, 50mm diameter testing hole, PL lamp, clapboard, Dry and wet gauze ball |
Controller | German Siemens PLC or TH-900C Korea or TEMI |
Compressor | France's Tecumseh Brand or Germany |
Power | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz |
Optional accessories:
1. Cable Port: Two size of cable port is available: &50mm, &100mm.
2. Double door
3. Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
4. Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
5. Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door.
6. Entire ceiling blow-out duct
7. The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
8. Dehumidifier
9. The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity 21°C
Invest in the future of precise and efficient testing with our Walk-In Test Chambers. Upgrade your testing capabilities with a product that guarantees reliability, customization, and energy efficiency.
Manufacturer #Singapore #Thailand #Philiphines #Indonesia #Vietnam #Malaysia
Inquiry - Walk In Test Chamber Drive Programmable Testing Transformer