1
Share:
Walk In Test Temperature and Humidity Chamber
Precision Walk-In Temperature and Humidity Chamber for Controlled Environments
Product Description:
Elevate your research and testing capabilities with our Precision Walk-In Temperature and Humidity Chamber, meticulously designed to meet the demanding requirements of various industries. This state-of-the-art chamber provides an ideal environment for conducting experiments, quality control tests, and product development.
Key Features:
- Superior Temperature Control: Our chamber offers precise temperature regulation, ranging from -40°C to 80°C, allowing you to simulate extreme conditions with ease.
- Humidity Management: Achieve humidity levels from 10% to 98%, granting you the flexibility to replicate a wide range of environmental conditions.
- Spacious Interior: With ample space, this walk-in chamber accommodates a variety of specimens, products, and equipment, making it suitable for diverse applications.
- Energy-Efficient Design: Benefit from advanced insulation and refrigeration technology, ensuring energy efficiency and cost savings.
- User-Friendly Interface: The intuitive control system allows for easy programming and monitoring, ensuring seamless operation.
- Robust Construction: Crafted with high-quality materials, this chamber guarantees long-term durability and reliability.
Applications:
- Research & Development: Conduct comprehensive studies in fields such as pharmaceuticals, electronics, and materials science.
- Quality Assurance: Perform reliability testing and quality control checks on products to meet industry standards.
- Life Science: Create controlled environments for biological research, including plant growth and insect rearing.
- Aerospace: Simulate extreme temperatures and humidity levels for component testing and calibration.
- Automotive: Test the resilience of vehicles and their components under various climatic conditions.
Specifications:
| 1.1 Temperature range | -70 to +180℃ |
| 1.2 Temp Deviation | ≦ ± 2.0℃ |
| 1.3 Temp Fluctuation | ±0.5℃ |
| 1.4 Temp Uniformity | ±2.0℃ |
| 1.5 Heating up& cooling down rate | Heating up rate: RT ↑ +110℃ about 30min (no-load) Cooling rate: +110℃ down to RT about 60min (no-load, ) |
| 2 Humidity | |
| 2.Humidity control range | 10%R.H～98%R.H |
| Humidity deviation | ±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) |
| Humidity uniformity | ±3.0％RH(No load) |
| Humidity fluctuation | ±2.0％RH |
| Temperature and humidity performance test is in accordance with the relevant provisions of the IEC60068 -3 standard measurement; sensor placed in the unit outlet. |
|
| Chamber size | Workspace volume: W 1500 × H 1500 ×D 1500 mm Exterior size: W 2110×H 1940×D 2550 mm (about) |
|
Single door, left open. Heating wire was installed at the door frames to prevent condensation at low temperatures. |
| 4．Observation window | With observation window(according to design), multi-hollow electric insulation coated glass prevent condensation effectively |
| 5．Lighting device | LED Lighting device *1 located on observation window |
| 6. Heating | High quality nickel-chromium alloy wire electric heaters, Non-contact control mode(SSR) |
| 7. Humidifier | Water basin heating and humidification method; Stainless steel sheathed heater; Heater control: no-contact control (SSR); Water level control device, heater anti-dry device. |
| 8. Water outlet hole | Available for drain the condensate water |
| 9. Cable port | Φ50mm*1 located on each side of chamber, with rubber stopper and stainless steel cover |
| 10. Shelf for samples | No |
| 11. Mobile Casters | Mobile Casters with foot cups |
|
Total power circuit breakers, over-temperature protectors |
|
Pump to enhance automatic water supply |
|
≧1000kg |
Standards:
● GB-2423．1-2008(IEC68-2-2) Test B: High Temperature Test
● GB-2423．1-2008(IEC68-2-2) Test B: Low Temperature Test
● GJB360．8-2009(MIL-STD．202F) High Temperature Operating Life Test
● GBJl50．3-2009(MIL-STD-810D) High Temperature Test
● GBJl50．4-2009(MIL-STD-810D) High Temperature Tes
Invest in our Precision Walk-In Temperature and Humidity Chamber to ensure the accuracy and reliability of your testing processes, ultimately leading to better products and breakthrough discoveries. Adapt to changing market needs and regulatory requirements while staying at the forefront of your industry.
#Manufacturer Indonesia Philiphines Thailand Vietnam Singapore
Inquiry - Walk In Test Temperature and Humidity Chamber
