Walk In Test Chamber with Separate Control for Precise Environmental Testing
Elevate your environmental testing capabilities with our Walk In Test AB Chamber with Separate Control. Designed specifically for professionals in need of precise and reliable testing environments, this walk-in chamber is a game-changer. Whether you're in the pharmaceutical, automotive, electronics, or any other industry requiring comprehensive environmental testing, our chamber delivers unmatched performance.
Separate Control: Our Walk In Test AB Chamber boasts separate control for temperature, humidity, and other environmental factors, allowing you to fine-tune each parameter independently. This precision ensures your testing meets exact specifications and standards.
Spacious Design: With ample interior space, this chamber accommodates various test setups, making it ideal for larger samples, equipment, or multiple tests simultaneously.
Temperature & Humidity Control: Achieve optimal conditions with the ability to control temperature and humidity within a wide range, ensuring your tests are accurate and reliable.
User-Friendly Interface: The intuitive control panel simplifies operation, and you can easily program, monitor, and adjust settings to meet your specific testing requirements.
Robust Construction: Built with durable materials and advanced insulation, our chamber is energy-efficient and designed to withstand rigorous usage.
Versatile Applications: Suitable for a wide range of industries, including pharmaceuticals, electronics, automotive, and aerospace, this chamber is a versatile tool for meeting industry standards and regulatory compliance.
|1.1 Temperature range||-40 to +150℃|
|1.2 Temp Deviation||≦ ± 2.0℃|
|1.3 Temp Fluctuation||±0.5℃|
|1.4 Temp Uniformity||±2.0℃|
|1.5 Heating up& cooling down rate||Heating up rate: RT ↑ +110℃ about 30min (no-load)
Cooling rate: +110℃ down to RT about 60min (no-load, )
|Humidity uniformity||±3.0％RH(No load)|
Temperature and humidity performance test is in accordance with the relevant provisions of the
IEC60068 -3 standard measurement; sensor placed in the unit outlet.
|Chamber size||All customize|
||Single door, left open. Heating wire was installed at the door frames to prevent condensation at low temperatures.|
|4.Observation window||With observation window(according to design), multi-hollow electric insulation coated glass prevent condensation effectively|
|5.Lighting device||LED Lighting device *1 located on observation window|
|6. Heating||High quality nickel-chromium alloy wire electric heaters,
Non-contact control mode(SSR)
|7. Humidifier||Water basin heating and humidification method;
Stainless steel sheathed heater;
Heater control: no-contact control (SSR);
Water level control device, heater anti-dry device.
|8. Water outlet hole||Available for drain the condensate water|
|9. Cable port||Φ50mm*1 located on each side of chamber, with rubber
stopper and stainless steel cover
|10. Shelf for samples||No|
|11. Mobile Casters||Mobile Casters with foot cups|
||Total power circuit breakers, over-temperature protectors|
||Pump to enhance automatic water supply|
● GB-2423．1-2008(IEC68-2-2) Test B: High Temperature Test
● GB-2423．1-2008(IEC68-2-2) Test B: Low Temperature Test
● GJB360．8-2009(MIL-STD．202F) High Temperature Operating Life Test
● GBJl50．3-2009(MIL-STD-810D) High Temperature Test
● GBJl50．4-2009(MIL-STD-810D) High Temperature Test
Elevate your testing precision with the Walk In Test AB Chamber Separate Control. Ensure the reliability and accuracy of your products by subjecting them to the most demanding environmental conditions. Trust in the quality and performance of our walk-in chamber to help you achieve consistent and reproducible results. Order today and take your environmental testing to the next level.
#manufacturer Indonesia Philiphines Thailand Vietnam Singapore
Inquiry - Walk In Test Chamber with Separate Control for Precise Environmental Testing