Share:


Metallographic Sample Grinding and Polishing Machine (HY-MP-2)

Metallographic Sample Grinding and Polishing Machine (HY-MP-2)

The HY-MP-2 metallographic sample grinding and polishing machine is a double-disc desktop machine, which is suitable for pre-grinding, grinding and polishing operations on metallographic samples. The left disc of this machine is a pre-grinding disc, and the right disc is a polishing disc. It is an indispensable equipment for users to make metallographic samples

Cooling system

The machine is equipped with a cooling device, which can cool the sample during grinding and polishing to prevent the metallographic structure from being damaged due to overheating of the sample.



Control System

This machine is controlled by the switch key to run the grinding and polishing disc. When the switch key is "on", the grinding and polishing disc runs, and the rotation speed of the left disc 450r/min and the right disc 600r/min can be obtained. When the switch key is "off", the grinding and polishing disc stops running



HY-MP-2 Specifications:
 
Technical parameter Machine model
HY-MP-2
Structure Double-disc benchtop ·
Grinding diameter φ230mm ·
Disk diameter φ200mm ·
Grinding and polishing disc φ200mm or φ230mm O
Disc speed 450r/min (Constant speed) ·
Disk speed 600r/min (Constant speed) ·
Tick value ≤2% ·
electric motor YC7124370W ·
Operating Voltage 220V 50HZ ·
Dimensions 690*715*310mm ·
Net weight 40kg ·
Gross weight 58kg ·
Magnetic disk φ200mmφ230mm O
Anti stick disc φ200mmφ230mm
Metallographic sandpaper 320#600#800#1200# etc.
Polishing flannel Silk velvet, canvas, woolen, etc.
Diamond polish W0.5umW1umW2.5um etc.

Manufacturer #Indonesia #Thailand #Philippines #Singapore #Vietnam

 Inquiry - Metallographic Sample Grinding and Polishing Machine (HY-MP-2)