Share:


HannYa Environmental Chamber Humidity For Laboratory And Industrial Workshops (HY-2225)

Environmental Chamber Humidity For Laboratory And Industrial Workshops (HY-2225)

Model: HY-LY-280,HY-LY-2150,HY-LY-2225,HY-LY-2408,HY-LY-2800

Introduction:

Temperature humidity test chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from battery, communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.

Temperature and humidity testing help to determine the behavior of the components in severe test conditions and environments that involve fluctuating environment, high temperature, and different relative humidity. The tests can be done with constant temperature and humidity in a static state and can bedone in a dynamic state where the moisture is used to induce a failure of the components or materials.

Standards:
GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566 etc.

Characteristics:

1. Graceful appearance, circularly shaped body, surface treated with mist strips . Easy to operate, safe and reliable.

2. Rectangular double-paned viewing window for viewing sample under test, with interior light

3. Double-layer-insulated airtight doors, able to insulate the internal temperature effectively.

4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.

5.French Tecumseh is used as compressor, with environment friendly refrigeration R23 or R404A

6. LCD display screen, capable of displaying the measured value as well as the set value and time.

7. The control unit has the functions of multiples segment program editing, with quick or ramp rates control of temperature and humidity.
 

Advantage of Temperature Humidity Control System Unit Test Equipment
● Small, portable, benchtop design
● Wide temperature ranges and volume selection.
● Programmable touch screen controller.

Specifications:

Model HY-280 HY-2150 HY-2225 HY-2408 HY-2800

Inner Size

W×H×D(cm)

40×50×40 50×60×50 60×85×80 60×85×80 100×100×80

Outside Size

W×H×D(cm)

93×155×95 100×148×106 117×166×91 140×176×101 170×186×111
Volume (V) 80 L 150L 225L 408L 800L
Temp and Hum Range

A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C

RH20%-98%

Function Fluctuation ±0.5°C ±2.5%RH
Deviation ±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)

Controller

Analytical

Accuracy

±0.3°C ±2.5%RH
Wind Cycling Way Centrifugal fan-broadband type forced air circulation
Refrigeration Way Single stage compression refrigeration
Refrigerator French Tecumseh
Refrigerants R4O4A USA DuPont environmental protection refrigerant(R23+R404)
Condensing Way Air-cooled or water-cooled
Water Supplying Way Automatic cycling water supply
Standard Accessories

1 Observe window(double-deck cavity toughened glass),

1 50mm test hole in the left,

1 PL inner chamber lamp,

2 clapboards,

1 bag of wet and dry bulb,

3 fuses,

1 power line.

Safety device

Non- fuse-switch(compressor overload,

refrigerant high low voltage,

over-humidity and temperature protection,

Protection switch,fuse stoppage warning system


Untitled


 Inquiry - HannYa Environmental Chamber Humidity For Laboratory And Industrial Workshops (HY-2225)